We found 102 job offers Mechanical/Automotive Engineering Jobs in Myanmar

NOC Specialist
Company: Camusat Myanmar Co., Ltd

24x7 Proactive monitoring the Passive Infra alarms in COC Platform and Client RMS Tools.Fault handling and escalation identifying and responding to faults on COC systems as per SLA Centrally coordinating with Customer as well as Field team to maintain Network performance as well as stability at the customer end. Development of knowledge and skills in network and system administration, particularly with regard of COC platforms.Fault management, troubleshooting Problem resolution by raising CSRCustomer Service Request to the respective PE vendor.Based on the eventsAlarms captured from site, analyzing the fault with respect to Controller, Battery bank, Rectifiers prompt resolution on the same. Monitor the progress of all jobs and escalate a job to ensure that all Service Levels and Service Level Agreements SLA are achieved.Field force control, Team assignments for site down and critical alarmsParticipate in a 24x7 callout rotate if required.Create and Close the Trouble Ticket using Cocops Tool.Root cause analysis reporting Service, Performance monitoring and reporting.In addition, dealing with Regional team, Fueling team all power equipment vendors for site issues.Follow the rules defined in the Environmental Management System,Report any environmental noncompliance identified.

Job posted: 19.7.2019

NOC Supervisor
Company: Camusat Myanmar Co., Ltd

Camusat Myanmar company requires the services of an experienced COC Specialist who can assume the role for one of our more advanced operation teams working on a rotating schedule .The COC Specialist is responsible for ensuring that Passive infrastructure alarms are proactively monitored. This role is also responsible for providing realtime observation of Passive infrastructure and to initiate actions required in response to service incidentsResponsible to Manage and maintain the COC Monitoring Systems and COC teamOversees day to day NOC operations across multiple shifts, drives incident management, troubleshooting progress and incident resolution to include requests for additional resource or escalation of tasks, if needed, to higher tiers of support.24x7 Proactive monitoring the Passive Infra alarms in COC Platform and Client RMS Tools.Fault handling and escalation identifying and responding to faults on COC systems as per SLA Centrally coordinating with Customer as well as Field team to maintain Network performance as well as stability at the customer end. Development of knowledge and skills in network and system administration, particularly with regard of COC platforms.Fault management, troubleshooting Problem resolution by raising CSRCustomer Service Request to the respective PE vendor.Based on the eventsAlarms captured from site, analyzing the fault with respect to Controller, Battery bank, Rectifiers prompt resolution on the same. Monitor the progress of all jobs and escalate a job to ensure that all Service Levels and Service Level Agreements SLA are achieved.Field force control, Team assignments for site down and critical alarmsParticipate in a 24x7 callout rotate if required.Create and Close the Trouble Ticket using Cocops Tool.Root cause analysis reporting Service, Performance monitoring and reporting.In addition, dealing with Regional team, Fueling team all power equipment vendors for site issues.Follow the rules defined in the Environmental Management System,Report any environmental noncompliance identified.

Job posted: 19.7.2019

Service Advisor
Company: Toyota Aye and Sons Co., Ltd.

Ensure speedy maintenance and repair through clear identification of customer needs and accurate repair order preparation Utilize the Service Appointment system to maximize the facility and manpower capacity Ensure vehicle cleanliness through use of vehicle protection materials seat covers, floor mats, etc. Provide clear cost estimates and keep customers informed of work progress Monitor the work progress and keep customers informed of changes to cost and completion times Create clear precise customer invoices that show and itemize all parts, labor and lubricant charges Actively promote the services and benefits of the dealers service and parts departments to all customers Take all necessary actions to resolve customer complaints in the shortest possible time Ensure all customers vehicles are clean and ready according to the promised completion time Ensure all filing is kept up to date including customer history files and regular purging of inactive customer files Conduct customer service reminders Carry out the service delivery to the customers using the Toyota Active Service Delivery process

Job posted: 19.7.2019

Mechanic
Company: Focus Star Co., Ltd.

Automotive

Job posted: 19.7.2019

M & E Trainee
Company: Toyota Aye and Sons Co., Ltd.

Lifts maintenanceChecking and reparing phone, network and electricCan work with team workNeed to take responsibility of all area of work place.Department : Planning General Affairs Department

Job posted: 18.7.2019

Site Engineer
Company: EPCM Myanmar Co., Ltd.

Good communications skills interpersonal skills and ability to work under pressure.Willing to travel in Myanmar .Site Engineer ACMV

Job posted: 18.7.2019

M&E Supervisor
Company: Aquamarine Ecotourism Development Co., Ltd


Job posted: 18.7.2019

M&E Worker
Company: Aquamarine Ecotourism Development Co., Ltd


Job posted: 18.7.2019

O&M Field Technician
Company: i engineering Myanmar Ltd

Responsible for the completion of service requests preventive or corrective on all mechanical or other assets assigned to according to scope of work, typical as following but not limited to: a. Servicing, decommissioning, installation or integration of generators according to standard procedures and practices. b. Ensuring that preventive or corrective maintenance is performed according to procedures and agreed checklists and all issues are permanently closed. c. Proper cleaning and janitorial services of the sites and assets. d. Decommissioning, installation and troubleshooting any fault in mechanical equipment. e. Any other work assigned to from time to time.Schedules and executes the preventive routine maintenance jobs on all equipment under hisher assignment. Attends emergency call outs, fixes the problem on equipment and restores the service within SLA, follows up the issues till permanent closure and helps to find the root cause of problems and appropriate solutions. Coordinates between NOC, immediate supervisor, client and other subcontractors, for proper maintenance of hisher sites mechanical equipment. Be available for emergency service delivery, through SMS phone calls or other communication means.Proficiently uses test equipment and devices on sites and analyzes test results. Records and reports all faults, deficiencies, and other unusual occurrence regularly to the OM Coordinator using i engineerings reporting formats. Ensures proper care of all company properties such as tools equipment, vehicle, Mobile DG, accommodation. Reports all theft and litigation issues as per process and supports the OM Coordinator, Site Security where applicable. Be responsible for fuel delivery and consumption and supports the OM Coordinator, Fuel for fuel management where applicable. Ensures that all works being executed under hisher supervision conform with the Clients specifications and the approved drawings. Coordinates efforts with all sections of the company Procurement Logistics, Projects, HR and Accounts as per company internal procedures. Ensures that all mechanical tools and equipment are in accordance with the engineering standards and specifications. Ensures that all spares or consumables used during maintenance are good quality and standard. Understands all processes, works accordingly and gives feedback for improvement. Keeps record of inventory, problem history for all equipment under his control. Being a team leader, coach and enable other team members, check standard of work executed and be responsible for scope of whole team work.Ensures the implementation of OHSQMS requirements on all assigned cell sites. Fills all related OHSQMS documents on sites. Conducts Site Safety Induction by explaining to the subcontractors their responsibilities in terms of OHS requirements of i engineering and clients. Ensures that adequate PPE is used by both i engineering and subcontractors teams. Ensures that safe work procedures are being adhered to. Investigates and fills the incident investigation report and shares it with the OHS representative. Ensures emergency drills are conducted on sites. 8. Deals directly with the clients representative on all OHS matters on sites. Reports on any hazard, incident, and accident to the direct supervisor of all assigned sitesSection: Operations MaintenanceReports To: OM CoordinatorJob Title: OM Field Technician,Mechanical

Job posted: 18.7.2019

PDI Staff
Company: TTAS Co.,Ltd

To check the brand new car condition port in out, stockyard inout.To report directly to Manager if there is any special case happen.

Job posted: 18.7.2019

WHO WE ARE

Yangonjobseeker.com is the leading Myanmar job offer aggregator. Yangonjobseeker.com website was developed to help job seekers easily browse the best jobs and learn about Myanmar employers and most of Myanmar job agencies. Our extensive resources have allowed us to compile a list of the best jobs currently available at Myanmar job market. If, by some chance, you do not find your dream job listed, check back the site later. We frequently update our website to provide you with the most current employment opportunities in Yangon and other cities in Myanmar.